Health & safety measures for floor sawing workers in Perth

Health & safety measures for floor sawing workers in Perth

The construction industry has appeared to be an employer of a vast number of civilians and immigrants. Still, there is scope for a specific sub-industry falling under this genre – the floor sawing Perth-based industry, to improve. Every article talks about how each service provider is better than its competitors. So this article chooses to be concerned about the workers in the floor sawing and tiling industry and seeks to educate them on the health and safety measures that they must keep in mind.

Image result for floor sawing perth

Considering the work area

Using the saw machine where there is a danger to ignition of flame or explosion is heavily condemned. Setting up a secure boundary around the workspace using tapes and signs, and stopping the work if someone other than any worker has entered the work zone must be practiced. A proper ventilation system or other extraction systems must be approved before floor sawing in Perth is started, so as to avoid inhaling toxic fumes.

Equipment to be worn

An average Perth floor sawing machine is to cause noise up to 96dB(A). Wearing high-quality ear muffs is mandatory for protecting the worker’s ear. Breathing problems like asthma must be avoided by wearing appropriate dust masks before entering the work zone. Gloves and boots meeting the government minimum requirements should also be put on before switching on the floor sawing machine.

Using the machine

The machines for floor sawing Perth companies use are mostly for cutting concrete, masonry, and asphalt floors. They must not be used to cut asbestos or materials containing asbestos. The worker must be properly acquainted with the floor sawing machine’s controls before he or she uses it. If the machine appears to be damaged, do not try to fix it yourself. Consider informing the provider. The two common requirements that workers may seem to ignore –

· Using the floor sawing machine with both hands

· Checking and adjusting the pointer arm before switching the machine ON because it can be swung when OFF.

Adjusting the wheels

Never change or adjust the wheels unless you are trained to do so. Wheels can be of various sizes to cater to different needs. Hence the size of the wheels must be checked before fixing them to the floor sawing machine. All wheels also have different speed limits. So it must be checked that whether the machine can go up to that speed limit to which the wheel might go.

Refuel

The machines for floor sawing Perth based enterprises use require petrol as their fuel. While dealing with petrol, no risks should be taken. So avoid spilling petrol while pouring it into the machine and always allow it to cool down. If petrol is spilled on the machine or the floor, wipe them out before you turn ON the machine. And definitely, avoid smoking near the work zone.

Last words for safety

You can find floor sawing in Perth a common activity. But when it comes to safety, both the workers and the customers are equally important. It is important that floor sawing is implemented by the finest companies who keep in mind their safety and quality of work. To check out the safety measures taken by the finest floor sawing companies in Perth, visit websites such as http://www.cutwell.com.au/

Leave a Reply

Your email address will not be published. Required fields are marked *